What prop do I start with?

Post your restoration and rebuild projects here.

Moderators: Redneck_Randy, badmoonrising, lakerunner

Post Reply
Message
Author
Polaris192
Posts: 2
Joined: Sat Mar 04, 2017 6:30 pm
Location: Edgerton, WI

What prop do I start with?

#1 Post by Polaris192 » Mon May 29, 2017 4:22 am

I have a 2000 Bennington 2275 lx (22'). I am almost finished adding a 3rd log with lifting strakes and added lifting stakes to the inside of the outer toons. I'm also re powering from a 125 merc to a 200 Optimax. Looking for somewhere to start to get the right prop.
2000 Bennington 2275 lx
125 h.p. Mercury

JLester273
Posts: 241
Joined: Wed May 10, 2017 10:23 am
Location: Cincinnati Ohio

Re: What prop do I start with?

#2 Post by JLester273 » Thu Jun 22, 2017 8:25 am

Somewhere on the forum there is a propping chart or thread. Maybe in the General section. Let me go see if I can find it for you.

Yep see if this link works.

viewtopic.php?f=2&t=18813

If not it is in the General pontoon discussion section.
My rebuild thread.
http://www.pontoonforums.com/viewtopic.php?f=16&t=24807

kenbob62
Posts: 45
Joined: Wed Oct 06, 2010 9:10 am
Location: jackson nj

Re: What prop do I start with?

#3 Post by kenbob62 » Fri Jun 23, 2017 8:51 am

I am basically in the same situation,i just added 3rd toon 250 opti ,the strakes are going on next winter,but my pontoon is totally different ,i have a prop i tried that didn't meet my rpm wot needs its a 15 dia 17 pitch alum mercury black max if your interested,95$ used twice,
kenny...2005 32 ft party cruiser ,2005 silverado 6.0 4x4 what a long strange trip its been

Post Reply