Restoring "Loretta Jane"

Post your restoration and rebuild projects here.

Moderators: Redneck_Randy, badmoonrising, lakerunner

Message
Author
User avatar
TWB
Posts: 658
Joined: Sun Mar 18, 2018 7:40 am
Location: Navarre, FL

Restoring "Loretta Jane"

#1 Post by TWB » Sat Mar 24, 2018 6:22 pm

Well... today began what will be a slow process of restoring "Loretta Jane". We decided on a name, and will officially have the naming ceremony later. We'll likely use the ceremony outlined by badmoonrising, but gonna have to water it down - the Admiral isn't too keen on the topless women. We're naming her after my mother who passed away recently. A beautiful, sweet woman. I hope to honor her by turning the toon back into a beauty.

So today was pull the seats and see if there is any hope. I'm gonna try to attach a couple of pictures. You will see that I will shamelessly promote a product that I learned about here. MAN! What results! I hope you agree.

The 2 bench seats were from opposite sides of the bow. They looked exactly the same.
A ton to do, but today was pretty inspiring. Just gonna have to watch the $$$. I can see where it can get expensive in a hurry. Anxious for tomorrow!
Attachments
seat compare.jpg
seat compare.jpg (80.95 KiB) Viewed 6499 times
marine31.jpg
marine31.jpg (80.22 KiB) Viewed 6499 times
Paul & Michele
2003 Landau DX 24' Cruise "Loretta Jane"
2003 Mercury 75hp
My Rebuild: http://pontoonforums.com/viewtopic.php?f=16&t=26135

"Don't waste brain cells over something you can do nothing about." --My Wife

User avatar
HandymanHerb
Site Admin
Posts: 14314
Joined: Fri Mar 17, 2006 8:57 pm
Location: Orlando Fla

Re: Restoring "Loretta Jane"

#2 Post by HandymanHerb » Sat Mar 24, 2018 8:33 pm

One step at a time
In Memory of John 6x6 Larsen

Image

ron nh
Posts: 979
Joined: Sun Sep 21, 2014 1:07 pm
Location: Litchfield New Hampshire

Re: Restoring "Loretta Jane"

#3 Post by ron nh » Sun Mar 25, 2018 7:19 am

Wow, Looking at that seat I would have bet the mortgage it never would have come out that good.
2015 Qwest LS 818XRE Tri-toon w/mercury 115.

User avatar
bansil
Posts: 1103
Joined: Tue Nov 01, 2016 4:10 pm
Location: Watâ'gi lake...Beautiful Waters

Re: Restoring "Loretta Jane"

#4 Post by bansil » Sun Mar 25, 2018 10:22 am

Good to see another rebuild/mod...wifes father passed last weekend (91 yrs old)
I grabbed an old fishing pole of his to make a plaque type memorial for our 'toon

Good luck!
Check out "Dudes" site www.whereisdude.com

User avatar
TWB
Posts: 658
Joined: Sun Mar 18, 2018 7:40 am
Location: Navarre, FL

Re: Restoring "Loretta Jane"

#5 Post by TWB » Sun Mar 25, 2018 2:06 pm

[quote="bansil"]Good to see another rebuild/mod...wifes father passed last weekend (91 yrs old)
I grabbed an old fishing pole of his to make a plaque type memorial for our 'toon

Good luck![/quote]

Sorry for your loss, bansil. Sounds like a really nice tribute! My mom's passing was 3 weeks ago.

Cleaned the rest of the seats yesterday and the back cushions today. They all came out great. Also pressure washed the carpet to get out the pelican/owl/? crap and stains. Turned out well, but the carpet will definitely be replaced after this year. Rotted...especially the front platform.

Be happy to know I have solved a major problem for the country! To identify sex offenders and enemy combatants, throw pelican crap on them! They will be permanently marked!! lol - I'm so damn funny!
Attachments
pelican crap seat.jpg
pelican crap seat.jpg (56.35 KiB) Viewed 6437 times
Paul & Michele
2003 Landau DX 24' Cruise "Loretta Jane"
2003 Mercury 75hp
My Rebuild: http://pontoonforums.com/viewtopic.php?f=16&t=26135

"Don't waste brain cells over something you can do nothing about." --My Wife

User avatar
TWB
Posts: 658
Joined: Sun Mar 18, 2018 7:40 am
Location: Navarre, FL

Re: Restoring "Loretta Jane"

#6 Post by TWB » Sun Mar 25, 2018 2:10 pm

I need some advice, please -- The hinges on one of the gates are corroded and will not budge. I sprayed them with Corrosion X, which usually works, but no joy. Anyone know of a product that will work?
Paul & Michele
2003 Landau DX 24' Cruise "Loretta Jane"
2003 Mercury 75hp
My Rebuild: http://pontoonforums.com/viewtopic.php?f=16&t=26135

"Don't waste brain cells over something you can do nothing about." --My Wife

User avatar
curtiscapk
Posts: 5393
Joined: Mon Nov 10, 2008 8:31 am
Location: OP KS\Hillsdale Lake

Re: Restoring "Loretta Jane"

#7 Post by curtiscapk » Mon Mar 26, 2018 6:15 am

TRy coke? it works for battery corrosion....?
Craig and Paula
"THE FLOATER" rebuild Spring 2013
viewtopic.php?f=2&t=15328
94 Party Barge 24' 115 merc
Turning Point hustler 14 x 13 prop
22mph gps 3 people
12 F150
Overland Park Ks
Hillsdale Lake, KS

User avatar
guy48065
Posts: 554
Joined: Wed Jul 18, 2012 4:32 am
Location: Atlanta, MI

Re: Restoring "Loretta Jane"

#8 Post by guy48065 » Mon Mar 26, 2018 9:03 am

Details on that Marine31? Spray & wipe or did you need to scrub (what with)?

I don't recall reading about that. Following other advice on this forum I've now got several bottles of 303 Protectant, Awesome Cleaner, Purple Power, Star Brite, and some mildew-killing house wash. LOL
Mark
1996 Sweetwater 180EX + Johnson 40
Rush Lake, Atlanta, MI

User avatar
TWB
Posts: 658
Joined: Sun Mar 18, 2018 7:40 am
Location: Navarre, FL

Re: Restoring "Loretta Jane"

#9 Post by TWB » Mon Mar 26, 2018 1:16 pm

I might have been mistaken about reading Marine 31 here. Sorry. My wife ordered it (a gallon and a spray bottle).
Spray on... let sit for a minute or two... sponge/ towel off... rinse well when finished. Some stubborn places needed a medium firm brush. We sparingly used Magic Eraser on some parts. REALLY bad spots were done twice. One key was - do NOT wet them first. Seemed to do much better starting dry. Sounds weird, but it worked.
Now be aware these are old seats. Marine 31 has pretty strong bleach, but I'm not worried right now because I'm planning to replace them next year. If you get it on the carpet, or your shirt, it's gonna bleach it out. If these were newer seats, I might think about it twice because of its bleach. We did the seats off the boat, and were very careful while doing the back cushions on the boat.

I will find out where she ordered it and $.

-Paul
Last edited by TWB on Mon Mar 26, 2018 5:42 pm, edited 1 time in total.
Paul & Michele
2003 Landau DX 24' Cruise "Loretta Jane"
2003 Mercury 75hp
My Rebuild: http://pontoonforums.com/viewtopic.php?f=16&t=26135

"Don't waste brain cells over something you can do nothing about." --My Wife

User avatar
TWB
Posts: 658
Joined: Sun Mar 18, 2018 7:40 am
Location: Navarre, FL

Re: Restoring "Loretta Jane"

#10 Post by TWB » Mon Mar 26, 2018 4:59 pm

Not trying to advertise for any single company, here is the link to Marine 31. This combo + tax & shipping (NW Florida) was $60.00.

https://www.marine31.com/m31-372-combo.html
Paul & Michele
2003 Landau DX 24' Cruise "Loretta Jane"
2003 Mercury 75hp
My Rebuild: http://pontoonforums.com/viewtopic.php?f=16&t=26135

"Don't waste brain cells over something you can do nothing about." --My Wife

User avatar
TWB
Posts: 658
Joined: Sun Mar 18, 2018 7:40 am
Location: Navarre, FL

Re: Restoring "Loretta Jane"

#11 Post by TWB » Mon Mar 26, 2018 5:03 pm

[quote="curtiscapk"]TRy coke? it works for battery corrosion....?[/quote]

You know...just for grins I'm gonna try this. If it works, you'll be a genius!
Paul & Michele
2003 Landau DX 24' Cruise "Loretta Jane"
2003 Mercury 75hp
My Rebuild: http://pontoonforums.com/viewtopic.php?f=16&t=26135

"Don't waste brain cells over something you can do nothing about." --My Wife

User avatar
TWB
Posts: 658
Joined: Sun Mar 18, 2018 7:40 am
Location: Navarre, FL

Re: Restoring "Loretta Jane"

#12 Post by TWB » Sun Apr 01, 2018 5:01 pm

Been working on the clean up of the boat. After sitting untouched on the lift in the salt air for 10 years, I was afraid it was going to be a lost cause for this year. Luckily, everything is cleaning quite nicely and my plan for getting this season out of her is looking good.
One small tear in one of the bimini tops; 5 hydraulic arms rusted out; gas tank needs pumping and exterior cleaning; new battery and testing electrical; - a lot of little things actually.
Gotta get her towed to the ramp to get her on the trailer. There's a guy who will come work on the motor at your house - much preferred than having to drag her to a shop. As soon as he does a (hopefully) small amount of magic, I hope to hit the water. Being optimistic and realistic, I'm thinking she might be wet in the next couple of weeks.

Hope everyone is having a great Easter weekend!
Paul & Michele
2003 Landau DX 24' Cruise "Loretta Jane"
2003 Mercury 75hp
My Rebuild: http://pontoonforums.com/viewtopic.php?f=16&t=26135

"Don't waste brain cells over something you can do nothing about." --My Wife

User avatar
TWB
Posts: 658
Joined: Sun Mar 18, 2018 7:40 am
Location: Navarre, FL

Re: Restoring "Loretta Jane"

#13 Post by TWB » Mon Apr 09, 2018 6:54 am

[quote="curtiscapk"]TRy coke? it works for battery corrosion....?[/quote]

Well, Craig, you might be half genius! Actually tried the "pour Coke on the corrosion" on the gate hinges... After a bit, took a pry bar and lifted the "lock" side just enough to get it to clear, and pushed it open. It was a hard push. Slowly worked it back and forth, spraying some WD-40 Silicone, scrubbing with a small wire brush, drinking the remaining Coke, lifting the hinge side with the pry bar a little at a time. Works like a dream now!

Clean up is pretty much done enough for getting wet. Seats all cleaned well. Carpet is clean and in decent shape. Console all clean and gauges shiny and working. Been very happy with the look. Pics will follow.

Took the motor cover off. Looks like a new motor! No dirt. No sludge. Plugs look brand new. Plug wires show no dryness. New fuel line, fuel filter, clean gas, some red Heet, new battery. Bumped it and it started. Ran rough at first (of course) but settled a bit. Shut it off. Can't wait for the motor guy to get to it. Very excited so far.

I would really appreciate some advice/ recommendations on docking lights. What's good? What sucks?
Paul & Michele
2003 Landau DX 24' Cruise "Loretta Jane"
2003 Mercury 75hp
My Rebuild: http://pontoonforums.com/viewtopic.php?f=16&t=26135

"Don't waste brain cells over something you can do nothing about." --My Wife

User avatar
curtiscapk
Posts: 5393
Joined: Mon Nov 10, 2008 8:31 am
Location: OP KS\Hillsdale Lake

Re: Restoring "Loretta Jane"

#14 Post by curtiscapk » Mon Apr 09, 2018 8:59 am

SWEET! I still have to hook these up but man are they bright!

https://www.pontoonstuff.com/collection ... king-light

use forum10 as a code for 10% off too.
Craig and Paula
"THE FLOATER" rebuild Spring 2013
viewtopic.php?f=2&t=15328
94 Party Barge 24' 115 merc
Turning Point hustler 14 x 13 prop
22mph gps 3 people
12 F150
Overland Park Ks
Hillsdale Lake, KS

User avatar
bansil
Posts: 1103
Joined: Tue Nov 01, 2016 4:10 pm
Location: Watâ'gi lake...Beautiful Waters

Re: Restoring "Loretta Jane"

#15 Post by bansil » Mon Apr 09, 2018 1:48 pm

only problem with flush mounts are the lack of vertical adjustment, that is why I went with what I did

otherwise back ones would be in the water and front would light up the top of trees lol
Check out "Dudes" site www.whereisdude.com

Post Reply