Help with hooking up motor

You know the drill..

Moderators: Redneck_Randy, badmoonrising, lakerunner

Post Reply
Message
Author
KylefromNJ
Posts: 55
Joined: Thu Apr 10, 2014 7:17 am

Help with hooking up motor

#1 Post by KylefromNJ » Wed Aug 27, 2014 2:46 pm

I just replaced my outboard on my toon. I took the old motor back and got it on an engine mount. I'm trying to just hook it up so that I can show it to prospective buyers that there's no problem w it. The motor is a 2007 8hp Yamaha High thrust 4 stroke model T8PXR. It has remote tilt and steering etc. Problem is, I don't know how to hook it back up, I now have a motor with a few wires and plugs unattached, a control cable, and the 703 throttle control.

Take a look at pic 1. There are 3 plugs and 4 wires not attached, which is exactly what the control wire has (pic 2).

It seems to me:

A - Tilt control plug
B - starter for motor plug
C - ?
wires 1-4 I do not know.

I have more pics if needed. Any insight would be appreciated.
Attachments
motor plugs.JPG
motor plugs.JPG (184.32 KiB) Viewed 9541 times
control wire plugs.JPG
control wire plugs.JPG (244.14 KiB) Viewed 9539 times
motor side view.JPG
motor side view.JPG (217.12 KiB) Viewed 9538 times

Post Reply