Toonmate flush mount for the Toonmate table pedestal.

You know the drill..

Moderators: Redneck_Randy, badmoonrising, lakerunner

Post Reply
Message
Author
User avatar
Rick McC.
Posts: 150
Joined: Fri Mar 31, 2017 7:12 pm
Location: Weeki Wachee, Fl

Toonmate flush mount for the Toonmate table pedestal.

#1 Post by Rick McC. » Sat May 20, 2017 8:35 pm

Just a heads up:

I bought a Toonmate table kit from Overtons a couple weeks ago, installed it, then both the wife and I kept stubbing our toes on the standard raised pedestal mount on the floor.

So, last week I ordered the flush mount; same brand, on the same page on their website.

When I received the flush mount base; the pedestal (stainless tube) wouldn't fit into it.

I called them, and they were very prompt in sending out another, and didn't even want me to return the first base.

Very nice; but the replacement one wouldn't accept the tube, either. I made it fit by removing material from the outer edge of the groove in the mount with a 1/4" bit in a drill press, then rotating the fixture "round and round" by hand.

Also, both mounts were packaged and marked identically, but neither were identified as a "Toonmate" part anywhere on the packaging.
Rick

Sights are for the unenlightened.

Post Reply