Hi,
I just got a used 2006 suntracker 21signature party barge and I'm redoing the vinyl. While pulling the seats I see allot of sitting water in the bases of the furniture. Any reason for me not to drill drain holes so the water runs. For now and into the future?
Thanx in advance,
-=Fred=-
Drain Holes in plastic seat bases
Moderators: Redneck_Randy, badmoonrising, lakerunner
Drain Holes in plastic seat bases
*** MY PET PEEVE *** If you ask for help and help is given be so courteous as to post how you finally fixed the issue.
- lakerunner
- Site Moderator
- Posts: 4820
- Joined: Fri Mar 17, 2006 2:31 pm
- Location: Live in McAlester, Ok Boat on Tenkiller
- Contact:
Re: Drain Holes in plastic seat bases
I did and also drilled holes in the bottom of the seat base
Loyd & Betty Meeks
Livin the lake life
2004 Tracker 22 Regency/2010 90 E-Tec. Pulled by Ford 2020 F 250,
McAlester, Oklahoma
Home lake is Tenkiller
Livin the lake life
2004 Tracker 22 Regency/2010 90 E-Tec. Pulled by Ford 2020 F 250,
McAlester, Oklahoma
Home lake is Tenkiller
Re: Drain Holes in plastic seat bases
Our Sun Tracker had a few drain holes drilled through from brand new. I ended up adding a few more holes in better locations as well as making the existing holes larger. In hindsight it might not have been the best thing for the plywood floor but then again there are worse things too.
T CRO
2017 Berkshire CTS 24 RFX with Yamaha F150/Simomized 200
2015 Caravelle 16 EBo with Mercury 90
2017 Berkshire CTS 24 RFX with Yamaha F150/Simomized 200
2015 Caravelle 16 EBo with Mercury 90
- lakerunner
- Site Moderator
- Posts: 4820
- Joined: Fri Mar 17, 2006 2:31 pm
- Location: Live in McAlester, Ok Boat on Tenkiller
- Contact:
Re: Drain Holes in plastic seat bases
I have the aluminum floor so no issue there.
Loyd & Betty Meeks
Livin the lake life
2004 Tracker 22 Regency/2010 90 E-Tec. Pulled by Ford 2020 F 250,
McAlester, Oklahoma
Home lake is Tenkiller
Livin the lake life
2004 Tracker 22 Regency/2010 90 E-Tec. Pulled by Ford 2020 F 250,
McAlester, Oklahoma
Home lake is Tenkiller
Re: Drain Holes in plastic seat bases
Thanx everyone for your response.
As I said I am reupholstering the seats. So I’m going to drill drain holes that also align with the screws securing the seat backs so I can go through the hole with the long screwdriver and undo the seat backs and also have drain holes that will do double duty.
-=Fred=-
As I said I am reupholstering the seats. So I’m going to drill drain holes that also align with the screws securing the seat backs so I can go through the hole with the long screwdriver and undo the seat backs and also have drain holes that will do double duty.
-=Fred=-
*** MY PET PEEVE *** If you ask for help and help is given be so courteous as to post how you finally fixed the issue.