E-Z Fender

Tell it like it is!

Moderators: Redneck_Randy, badmoonrising, lakerunner

Message
Author
User avatar
Capt Sully
Posts: 2098
Joined: Fri Aug 03, 2012 6:41 pm
Location: Kennesaw, Ga.

Re: E-Z Fender

#31 Post by Capt Sully » Wed Feb 25, 2015 12:17 pm

Well they say More and Bigger is better. :donno

I use Four, sorry you can't see them, but they are EZ Fender clamps. :thumbsup
EZ.jpg
EZ.jpg (116.32 KiB) Viewed 5604 times
2012 Xcurison X23C
Yamaha 90 hp 4 stroke
Dual axle full bunk trailer ready to go
All pulled with Z71 4WD Silverado
Maritime mobile KD4LZL
Lake Allatoona, NW Ga.
FVC USCG Auxiliary
Vietnam 66 / 67

robertm
Posts: 129
Joined: Tue Feb 24, 2015 1:55 pm

Re: E-Z Fender

#32 Post by robertm » Wed Feb 25, 2015 2:57 pm

Ok next simple question. If you tie a knot on the end of the fender rope that implies you leave the fenders there all the time?

If so do you tow like this too? I will be pulling the boat in and out of the water and towing it to various lakes every time we take it out. Not sure if I want the fenders slapping the sides of the boat going down the highway. Even speeding across the lake at close to 40 mph it seems like they could beat things up.

Thoughts?
'Miss Kelley'
2015 Berkshire 253 RFX Super Sport
Yamaha F200 LB
14.5" X 15P SS Reliance
2015 Ram 1500 Eco Diesel

User avatar
curtiscapk
Posts: 5393
Joined: Mon Nov 10, 2008 8:31 am
Location: OP KS\Hillsdale Lake

Re: E-Z Fender

#33 Post by curtiscapk » Wed Feb 25, 2015 3:06 pm

Actually I tow my 3 miles with them out.... otherwise just flip em in! as for on the water haven't really experience anything at 20 mph! :nutkick
Craig and Paula
"THE FLOATER" rebuild Spring 2013
viewtopic.php?f=2&t=15328
94 Party Barge 24' 115 merc
Turning Point hustler 14 x 13 prop
22mph gps 3 people
12 F150
Overland Park Ks
Hillsdale Lake, KS

Bryden24shp
Posts: 1872
Joined: Wed Nov 12, 2008 6:28 am
Location: Iowa/Lake of the Ozarks, Mo.
Contact:

Re: E-Z Fender

#34 Post by Bryden24shp » Thu Feb 26, 2015 11:06 am

On a 25 footer, I recommend 4 per side. Just like Sully did. The thumbscrews won't back out any more. I am now cold sealing the last few threads. If anyone has any Pre-2015 models, a little dab of JB weld between the last 2 threads will keep them from acking out. Works better than pressing them. And if you want to take them out to mount a camera in place or something, you can get them out with a small pair of pliers and a rag between the teeth. I always recommend using a 3/8" fender line. The thicker the better. But 1/2" is kinda over kill on our pontoon boats. If you need them, just give me a yell. I'll get them out to you right away.
Owner-EzFender Boat Products
Members, visit your discount page at:
http://www.ezfender.com/PontoonForums-M ... -Page.html

User avatar
mike
Site Owner
Posts: 1727
Joined: Thu Feb 02, 2006 5:04 pm
Location: Boise Idaho

Re: E-Z Fender

#35 Post by mike » Fri Feb 27, 2015 9:24 am

Do you want me to throw up an ad at the top with the member price shown and a link to this topic?
1999 Voyager 21' Express Fish triple toon 115hp Mercury (SOLD)
2004 Ford F150 SuperCrew
Boise Idaho

Bryden24shp
Posts: 1872
Joined: Wed Nov 12, 2008 6:28 am
Location: Iowa/Lake of the Ozarks, Mo.
Contact:

Re: E-Z Fender

#36 Post by Bryden24shp » Fri Feb 27, 2015 11:41 am

mike wrote:Do you want me to throw up an ad at the top with the member price shown and a link to this topic?
Actually, I just got done building a new Forum Members discount webpage I was going to show you! Yes! That would be great Mike! You can just link the site if you would like!
Here is the site! http://www.ezfender.com/PontoonForums-M ... -Page.html
Thanks Mike!
Owner-EzFender Boat Products
Members, visit your discount page at:
http://www.ezfender.com/PontoonForums-M ... -Page.html

User avatar
Capt Sully
Posts: 2098
Joined: Fri Aug 03, 2012 6:41 pm
Location: Kennesaw, Ga.

Re: E-Z Fender

#37 Post by Capt Sully » Fri Feb 27, 2015 6:00 pm

Bryden24shp wrote:
mike wrote:Do you want me to throw up an ad at the top with the member price shown and a link to this topic?
Actually, I just got done building a new Forum Members discount webpage I was going to show you! Yes! That would be great Mike! You can just link the site if you would like!
Here is the site! http://www.ezfender.com/PontoonForums-M ... -Page.html
Thanks Mike!

Hey Bryan, That's a good looking Toon in the top right side of your discount page. :nana

Happy to help out, :thumbsup
2012 Xcurison X23C
Yamaha 90 hp 4 stroke
Dual axle full bunk trailer ready to go
All pulled with Z71 4WD Silverado
Maritime mobile KD4LZL
Lake Allatoona, NW Ga.
FVC USCG Auxiliary
Vietnam 66 / 67

Bryden24shp
Posts: 1872
Joined: Wed Nov 12, 2008 6:28 am
Location: Iowa/Lake of the Ozarks, Mo.
Contact:

Re: E-Z Fender

#38 Post by Bryden24shp » Sat Feb 28, 2015 4:44 am

Capt Sully wrote:
Bryden24shp wrote:
mike wrote:Do you want me to throw up an ad at the top with the member price shown and a link to this topic?
Actually, I just got done building a new Forum Members discount webpage I was going to show you! Yes! That would be great Mike! You can just link the site if you would like!
Here is the site! http://www.ezfender.com/PontoonForums-M ... -Page.html
Thanks Mike!
Hey Bryan, That's a good looking Toon in the top right side of your discount page. :nana
Happy to help out, :thumbsup
Ya, that's a great pic! I have it plastered all over the place. Well, Denise told me to take it off the bedroom ceiling! Darn it!
Thanks for the pic. I'll take all I can get, I appreciate them, very much...
Owner-EzFender Boat Products
Members, visit your discount page at:
http://www.ezfender.com/PontoonForums-M ... -Page.html

robertm
Posts: 129
Joined: Tue Feb 24, 2015 1:55 pm

Re: E-Z Fender

#39 Post by robertm » Mon Mar 02, 2015 6:56 am

Thanks very much for all the feedback. I will definitely be buying a few pairs of these. Going to wait until I actually get the boat to decide if I want 3 or 4 per side.
'Miss Kelley'
2015 Berkshire 253 RFX Super Sport
Yamaha F200 LB
14.5" X 15P SS Reliance
2015 Ram 1500 Eco Diesel

User avatar
mike
Site Owner
Posts: 1727
Joined: Thu Feb 02, 2006 5:04 pm
Location: Boise Idaho

Re: E-Z Fender

#40 Post by mike » Mon Mar 02, 2015 2:25 pm

ok, you need to add the l at the end of your signature link (.html), its returning a dead link as it is now...
1999 Voyager 21' Express Fish triple toon 115hp Mercury (SOLD)
2004 Ford F150 SuperCrew
Boise Idaho

User avatar
mike
Site Owner
Posts: 1727
Joined: Thu Feb 02, 2006 5:04 pm
Location: Boise Idaho

Re: E-Z Fender

#41 Post by mike » Mon Mar 02, 2015 2:33 pm

how does this look?
Attachments
ezfender.jpg
ezfender.jpg (9.33 KiB) Viewed 5375 times
1999 Voyager 21' Express Fish triple toon 115hp Mercury (SOLD)
2004 Ford F150 SuperCrew
Boise Idaho

User avatar
HandymanHerb
Site Admin
Posts: 14314
Joined: Fri Mar 17, 2006 8:57 pm
Location: Orlando Fla

Re: E-Z Fender

#42 Post by HandymanHerb » Mon Mar 02, 2015 2:52 pm

:thumbsup :thumbsup :thumbsup
In Memory of John 6x6 Larsen

Image

Bryden24shp
Posts: 1872
Joined: Wed Nov 12, 2008 6:28 am
Location: Iowa/Lake of the Ozarks, Mo.
Contact:

Re: E-Z Fender

#43 Post by Bryden24shp » Tue Mar 03, 2015 10:52 am

mike wrote:ok, you need to add the l at the end of your signature link (.html), its returning a dead link as it is now...
Fixed!!!
Owner-EzFender Boat Products
Members, visit your discount page at:
http://www.ezfender.com/PontoonForums-M ... -Page.html

Bryden24shp
Posts: 1872
Joined: Wed Nov 12, 2008 6:28 am
Location: Iowa/Lake of the Ozarks, Mo.
Contact:

Re: E-Z Fender

#44 Post by Bryden24shp » Tue Mar 03, 2015 10:53 am

mike wrote:how does this look?
Yes, looks very good! Thanks Mike!
Owner-EzFender Boat Products
Members, visit your discount page at:
http://www.ezfender.com/PontoonForums-M ... -Page.html

User avatar
mike
Site Owner
Posts: 1727
Joined: Thu Feb 02, 2006 5:04 pm
Location: Boise Idaho

Re: E-Z Fender

#45 Post by mike » Fri Mar 06, 2015 7:58 am

Ok, done! :nana
1999 Voyager 21' Express Fish triple toon 115hp Mercury (SOLD)
2004 Ford F150 SuperCrew
Boise Idaho

Post Reply