Trolling motor update
Moderators: Redneck_Randy, badmoonrising, lakerunner
-
- Posts: 637
- Joined: Wed Nov 14, 2012 5:56 pm
Trolling motor update
While finally got my new Minnkota trolling motor mounted and all set up. Man is it a great investment was a little costly but I think while worth it. When you get old and arms and legs can’t take pulling and tugging the Minnkota ulterra is your answer. It has auto deploy and stow, spot lock and anchor feature all great options. Tried them all out and they all work great. Has a remote so everything can be done from any place on the boat.
Bob Jacksonville, Nc
2013 Excursion X23 RFC
2013 115 Yamaha
Pulled with a Ford King Ranch
2013 Excursion X23 RFC
2013 115 Yamaha
Pulled with a Ford King Ranch
- curtiscapk
- Posts: 5401
- Joined: Mon Nov 10, 2008 8:31 am
- Location: OP KS\Hillsdale Lake
Re: Trolling motor update
Craig and Paula
"THE FLOATER" rebuild Spring 2013
viewtopic.php?f=2&t=15328
94 Party Barge 24' 115 merc
Turning Point hustler 14 x 13 prop
22mph gps 3 people
12 F150
Overland Park Ks
Hillsdale Lake, KS
"THE FLOATER" rebuild Spring 2013
viewtopic.php?f=2&t=15328
94 Party Barge 24' 115 merc
Turning Point hustler 14 x 13 prop
22mph gps 3 people
12 F150
Overland Park Ks
Hillsdale Lake, KS
Re: Trolling motor update
What kind of boat do you have and what pound thrust did you buy? Been looking at those things for quite a while now.Gonefishing wrote: ↑Thu Sep 06, 2018 3:37 pmWhile finally got my new Minnkota trolling motor mounted and all set up. Man is it a great investment was a little costly but I think while worth it. When you get old and arms and legs can’t take pulling and tugging the Minnkota ulterra is your answer. It has auto deploy and stow, spot lock and anchor feature all great options. Tried them all out and they all work great. Has a remote so everything can be done from any place on the boat.
I am the guy at the boat ramp that gives you dirty looks when you are a complete idiot and too stupid to know it.
-
- Posts: 637
- Joined: Wed Nov 14, 2012 5:56 pm
Re: Trolling motor update
Riplipper
I have a 24 foot excursion with 115 Yamaha. I purchased the 80 pound thrust 24 volt Minnkota ulterra with I pilot. I think it is worth the cost for me that is. Auto deploy n stow with me having one artificial leg and bad knee on the other leg. It’s great. Not to mention the anchor mode and spot lock works great. No more throwing in and pulling up a anchor.
I have a 24 foot excursion with 115 Yamaha. I purchased the 80 pound thrust 24 volt Minnkota ulterra with I pilot. I think it is worth the cost for me that is. Auto deploy n stow with me having one artificial leg and bad knee on the other leg. It’s great. Not to mention the anchor mode and spot lock works great. No more throwing in and pulling up a anchor.
Bob Jacksonville, Nc
2013 Excursion X23 RFC
2013 115 Yamaha
Pulled with a Ford King Ranch
2013 Excursion X23 RFC
2013 115 Yamaha
Pulled with a Ford King Ranch
-
- Posts: 97
- Joined: Tue Jul 04, 2017 10:51 am
Re: Trolling motor update
A couple months ago I watched a guy (by himself) launch a bass boat....he backed in and pulled out without getting out of his pickup....went and parked his rig then walked down to the dock, climbed in and took off...impressive.
1973 Kayot with 1972 Evinrude 50 hp Lark
Re: Trolling motor update
Are you saying he backed it off the trailer, held position by the ramp, then brought it closer so he could climb in--all by remote? That's awesome! Now I want one!Retired OG wrote: ↑Tue Sep 11, 2018 7:07 amA couple months ago I watched a guy (by himself) launch a bass boat....he backed in and pulled out without getting out of his pickup....went and parked his rig then walked down to the dock, climbed in and took off...impressive.
Mark
1996 Sweetwater 180EX + Johnson 40
Rush Lake, Atlanta, MI
1996 Sweetwater 180EX + Johnson 40
Rush Lake, Atlanta, MI
-
- Posts: 637
- Joined: Wed Nov 14, 2012 5:56 pm
Re: Trolling motor update
Yep you can do that. The trolling motor has auto deploy so all you have to do is make sure the motor is plugged in and turned on. Then once in the water using your remote you deploy the trolling motor set the speed and turn it all by remote and drive it to the dock. It’s realy neat. Only thing is you better remember to turn on and plug the motor in or you are going for a swim.
Bob Jacksonville, Nc
2013 Excursion X23 RFC
2013 115 Yamaha
Pulled with a Ford King Ranch
2013 Excursion X23 RFC
2013 115 Yamaha
Pulled with a Ford King Ranch
Re: Trolling motor update
I've looked at the auto deploy and it's an aweome idea, but I have to go to the bow to open my bow gate anyway. Unless I remove the bowgate entirely, it just hasn't been worth the upgrade costs from my old 80# Terrova.
Pinawa Bay, Manitoba
2014 Premier Cast-a-way 231, PTX; 2014 Evinrude 250HO ETEC
2014 Premier Cast-a-way 231, PTX; 2014 Evinrude 250HO ETEC
-
- Posts: 637
- Joined: Wed Nov 14, 2012 5:56 pm
Re: Trolling motor update
Have to open gate is true. But what I do is open it once and leave it open then I can run my trolling motor all day with no problem or can just shut the gate and raise the trim up or down
Bob Jacksonville, Nc
2013 Excursion X23 RFC
2013 115 Yamaha
Pulled with a Ford King Ranch
2013 Excursion X23 RFC
2013 115 Yamaha
Pulled with a Ford King Ranch