Page 1 of 1
Do you know where I can find something like this
Posted: Sun Jun 13, 2021 10:34 am
by Kytoon
Don't know what it's called or where to look for it.
Anyone know what it's called or where I can buy something similar.
- fuel housing.jpg (726 KiB) Viewed 20219 times
Re: Do you know where I can find something like this
Posted: Sun Jun 13, 2021 5:05 pm
by Marc K
Re: Do you know where I can find something like this
Posted: Sun Jun 13, 2021 5:58 pm
by Kytoon
yes for fuel. Thank you. I should have been more specific. I was referring to the shroud.
Re: Do you know where I can find something like this
Posted: Wed Jun 16, 2021 6:25 pm
by bansil
That old, match hose to a new filler and just make a plate to mount it....chance of 100% mouth is slim to none.
Fiberglass and plastic is fragile and UV kicks its azz
Re: Do you know where I can find something like this
Posted: Sat Jul 17, 2021 8:33 pm
by gerard143
looks like someone installed that backwards ages ago. That trimmed outside edge of the square panel usually went against the mounting surface.
https://www.greatlakesskipper.com/searc ... fill+panel
Here is your closest bets at the moment. I might have a leftover real similar to yours. I'd have to check. I think I tossed them. I had about 6 of these. I custom painted a few and had a couple with clear coat runs and think I tossed them out.
Re: Do you know where I can find something like this
Posted: Sun Jul 18, 2021 7:47 pm
by Kytoon
Now that you say that I think your right. It is up side down. I moved into a different direction. More redneck. I have the hose sticking up in the air with a pop up gas lid/vent combo. Going to add more hose so it's out over the back of the boat and if the filler gets a little sloppy or not paying attention the overflow will not fall onto the carpet.
Re: Do you know where I can find something like this
Posted: Wed Jul 21, 2021 7:32 pm
by bansil
Def. Post pictures of diy redneck fix
Re: Do you know where I can find something like this
Posted: Tue Jul 27, 2021 11:23 am
by gerard143