Idea for graph transducer and livewell pump mount

Post your restoration and rebuild projects here.

Moderators: Redneck_Randy, badmoonrising, lakerunner

Post Reply
Message
Author
Midwestangler
Posts: 1
Joined: Sat Mar 04, 2023 7:24 pm

Idea for graph transducer and livewell pump mount

#1 Post by Midwestangler » Sat Apr 29, 2023 7:39 am

I’m in the middle of redoing a 1981 crest the logs are about 20’ and the deck is 16. Looking for ideas on how to mount a graph transducer and livewell pump. This old boat doesn’t have any brackets welded on the there rear of the tubes. I’m very weary of having brackets welded on these old tubes they seem to be a thinner gauge compared to todays tubes maybe I’m wrong idk. The current idea I have is taking some maybe 1” square aluminum tubing and creating a mount that I put on a swivel off the railing so I can turn it up when under way at higher than trolling speeds. Would like to hear how anyone else has dealt with this as I would definitely like more of a set it and forget set up with out welding into these tubes.

Here’s a few pics. started a couple weeks ago when I have spare time and can sneak out of the house. Wife and kids want the boat but are hesitant of the commitment to complete projects.
Attachments
1C691B92-0EA4-4B38-A3D5-DE769D4A7573.jpeg
1C691B92-0EA4-4B38-A3D5-DE769D4A7573.jpeg (362.08 KiB) Viewed 8832 times
FDB1EBCB-ECC6-460F-844F-C30E5083F76B.jpeg
FDB1EBCB-ECC6-460F-844F-C30E5083F76B.jpeg (572.38 KiB) Viewed 8832 times
16894E1A-3365-412C-AC77-17F2891E3C9E.jpeg
16894E1A-3365-412C-AC77-17F2891E3C9E.jpeg (1.33 MiB) Viewed 8832 times
9E4B2924-7DEE-4804-83D0-EDDF4F2B6904.jpeg
9E4B2924-7DEE-4804-83D0-EDDF4F2B6904.jpeg (314.47 KiB) Viewed 8832 times
CD6DA2EC-0287-4992-AB04-4EC9E626923B.jpeg
CD6DA2EC-0287-4992-AB04-4EC9E626923B.jpeg (289.67 KiB) Viewed 8832 times

Motor7
Posts: 118
Joined: Sat Aug 01, 2020 6:27 pm
Location: East Tennessee

Re: Idea for graph transducer and livewell pump mount

#2 Post by Motor7 » Sun Jul 23, 2023 3:32 pm

Looking good. What's the profile of the end of the logs at the stern...flat or curved?

I can shoot a pic tomorrow, mine are flat and the Port log has an aluminum rectangle welded to it right at the waterline for a pump pick up. You could easily add that and a transducer. Any skilled Al welder could fab something up quickly and weld it on for you. Aluminum has to have three things for a successful weld,,,,it has to be clean, it has to be clean it has to be clean :biggrin2
1987 28' Sun Tracker Party Hut pontoon

User avatar
curtiscapk
Posts: 5393
Joined: Mon Nov 10, 2008 8:31 am
Location: OP KS\Hillsdale Lake

Re: Idea for graph transducer and livewell pump mount

#3 Post by curtiscapk » Mon Jul 24, 2023 7:30 am

Great toon! Check out the link in my sig for tips and tricks! Somewhere on here somebody did the frame thing for their transducer. I'll see if I can find it.
Craig and Paula
"THE FLOATER" rebuild Spring 2013
viewtopic.php?f=2&t=15328
94 Party Barge 24' 115 merc
Turning Point hustler 14 x 13 prop
22mph gps 3 people
12 F150
Overland Park Ks
Hillsdale Lake, KS

Post Reply