Need offer idea, please help newbie.

[SCbarber]

What would you pay for it if you had a lower budget and wanted to get into tooning. Floor is original but solid as can be, everything else pretty new. Thanks!



http://wilmington.craigslist.org/boa/3077184382.html

[lakerunner]

Offer $8,000.00

[SCbarber]

I was thinking around that but wanted to make sure it was worth it. I know new trailer and 2 yr. old motor is around 7k so I think that is pretty good price.

[gramps]

I would offer $7,000 you can always go up a little if you have to. If you have cash then show him the money and watch what he does, cash is king.

[SCbarber]

ok will start at 7k, I just didn't know for a 95 where to be on it even though it is all redone. Thanks for the replies.

[evinrude2stroke]

What year is that motor? From the picture it looks older but I could be wrong.

[Ron Burgundy]

Are you paying cash or financing?

[Texoma Toon]

Looks to be in decent shape. Has a dent in uthe fence on the rear. Take it to a Yamaha mech before you give him any money and have the motor checked out. If all ok then it should be a good deal if you can get it for less than $8k.

[Texoma Toon]

Looks to be in decent shape. Has a dent in uthe fence on the rear. Take it to a Yamaha mech before you give him any money and have the motor checked out. If all ok then it should be a good deal if you can get it for less than $8k.

[rbiederwolf]

I agree with above that engione looks older than 2010. make sure it was purchased NEW in 2010, not just purchased in 2010. Also that it has a TOTAL of 50 hrs not 50 hrs since they purchased it.

All in all if it what they say I would think anything around 7 thou is a good deal, 7-8 thou is a fair deal.

Obviously have mechanic check engine, and inspect toons. Other than that there is not much else that can go wrong that cant be fixed easily.

[SCbarber]

What year is that motor? From the picture it looks older but I could be wrong.

He said he bought it new in 2010. I thought the same thing, but apparently not.

[Old Dog]

What year is that motor? From the picture it looks older but I could be wrong.

He said he bought it new in 2010. I thought the same thing, but apparently not.

Ask to see the invoice and any others related to the toon. I would assume the motor is fully paid, but check it out to be safe.

Looks like a real nice toon tho.

[SCbarber]

Yep, confirmed motor is a 2010 and he has the receipts for it, also the "dent" is just a wrinkle, the skirting is actual PTC, not metal (this was replaced when everything else was.)

[Texoma Toon]

Motor is a 2 stroke. that is why it looks older. 4 strokes are more rounded.
Just make sure you have a Yamaha mech ck it out.

[Heatman]

FYI, I have that same outboard. In '04 you could buy them for right around $5.500 new.