Page 1 of 1

i don't know what manufature my boat is?

Posted: Mon Mar 18, 2013 12:10 pm
by keosports
I have a 25ft pontoon boat with an all fiberglass deck, the title says SEI VS, i did some online research and somewhere I found that it was made by Larson but when I contacted larson they told me they never made a pontoon boat, the serial # is GWV263925898, please help I would like to know what the max HP the transom can handle.ImageImageImage

Re: i don't know what manufature my boat is?

Posted: Mon Mar 18, 2013 12:23 pm
by tms0425
According to the online HIN decoder it was "Coffcraft"

http://www.boatsafe.com/nauticalknowhow/hin.htm

The decoded info is here http://www.uscgboating.org/recalls/mic_ ... spx?id=GWV

Re: i don't know what manufature my boat is?

Posted: Mon Mar 18, 2013 12:53 pm
by curtiscapk
whoa when and where did you find that!!! Is that two projects you have now!?

Re: i don't know what manufature my boat is?

Posted: Mon Mar 18, 2013 12:55 pm
by curtiscapk
Are the toons only bolted on in four spots on each side????

Re: i don't know what manufature my boat is?

Posted: Mon Mar 18, 2013 5:29 pm
by BoatCop
It isn't a "Coffcraft".

Decoding the HIN shows that it is a 1998 model and Coffcraft was only in business from 2005-2011 building hovercrafts.

The GWV MIC (Manufacturers Identification Code) was probably recycled to Coffcraft from a builder that was out of business. When? At least 5 years before 2005.

They usually show all owners of a particular MIC, but for some reason it doesn't for this one.

I have an old MIC guide from the late 1990s at work. Maybe I'll find something there. I'll check tomorrow.

But from looking at the way the deck is attached to the toons, I'd bet that it's a backyard job and not factory.

Re: i don't know what manufature my boat is?

Posted: Tue Mar 19, 2013 7:48 am
by The_Hellbilly
Gotta say, it's an interesting thought, even if it's a homemade job. Any idea what the deck weighs?