4c innovations

You know the drill..

Moderators: Redneck_Randy, badmoonrising, lakerunner

Post Reply
Message
Author
Gonefishing
Posts: 637
Joined: Wed Nov 14, 2012 5:56 pm

4c innovations

#1 Post by Gonefishing » Sun Mar 09, 2014 9:20 am

While I received my 4c intervention system and got it installed. If next weekend is good weather I will be on the water and give it a test loading and unloading. Seems to be a good ideal. Quality of workmanship great. Install easy done it by my self would of been easer if I would of had another person but not bad doing it on my own. The guys at 4c are great to deal with had a couple of question and they were on top of it when it came to returning my call. The best of all was.
image.jpg
image.jpg (1004.92 KiB) Viewed 2087 times
. Yep made in USA they even take the time to but your name on it. Great job will let everyone know how it works next weekend. But if it works as good as it is made that will be great.
Last edited by Gonefishing on Sun Mar 09, 2014 4:19 pm, edited 1 time in total.
Bob Jacksonville, Nc

2013 Excursion X23 RFC
2013 115 Yamaha
Pulled with a Ford King Ranch

Waterlogged
Posts: 365
Joined: Tue Nov 29, 2011 1:00 pm
Location: California Central Coast

Re: 4c intervention

#2 Post by Waterlogged » Sun Mar 09, 2014 10:45 am

Pardon my ignorance, but what is a 4c intervention? Also could you please reduce the size of the photo so we can see what it is?

Glenn
2008 SunTracker Regency Party Barge 22 with lifting strakes
2008 Mercury 115 4 stroke

User avatar
rob28
Posts: 160
Joined: Sun Feb 24, 2013 8:35 am
Location: Dryden, Ontario. In the wilderness.

Re: 4c intervention

#3 Post by rob28 » Sun Mar 09, 2014 11:16 am

Waterlogged wrote:Pardon my ignorance, but what is a 4c intervention? Also could you please reduce the size of the photo so we can see what it is?

Glenn
I think it's meant to read '4C Innovations'. They're a company that make a very nice bunk guide system to help load your pontoon onto the trailer.
Here's my review - viewtopic.php?f=3&t=16962
Used to be a 2013 Sylvan Mirage Cruise 8520 LE powered by a Merc 50 Bigfoot.
Now we have a 2019 Sylvan Mirage 8522 DLZ LE powered by a Yamaha VF150..
2010 F-150 4.6L to haul it around.
You'll find us enjoying life on the Wabigoon.

Gonefishing
Posts: 637
Joined: Wed Nov 14, 2012 5:56 pm

Re: 4c intervention

#4 Post by Gonefishing » Sun Mar 09, 2014 4:05 pm

Correct it is a loading guide for pontoons check out this link http://www.4c-innovations.com.

What I was showing was just one piece of it that they put you name on and were. It is made being Morehead, ky. Sorry about the photo.
Bob Jacksonville, Nc

2013 Excursion X23 RFC
2013 115 Yamaha
Pulled with a Ford King Ranch

Waterlogged
Posts: 365
Joined: Tue Nov 29, 2011 1:00 pm
Location: California Central Coast

Re: 4c innovations

#5 Post by Waterlogged » Sun Mar 09, 2014 4:38 pm

Thanks for the comeback. Looks like an interesting setup.

Glenn
2008 SunTracker Regency Party Barge 22 with lifting strakes
2008 Mercury 115 4 stroke

Gonefishing
Posts: 637
Joined: Wed Nov 14, 2012 5:56 pm

Re: 4c innovations

#6 Post by Gonefishing » Sun Mar 09, 2014 5:00 pm

It is I did a lot of research before I purchased mine and it seems like it is a good system. I will let everyone know how it works out next weekend if weather permits and I can go to the river and do some loading and unloading.
Bob Jacksonville, Nc

2013 Excursion X23 RFC
2013 115 Yamaha
Pulled with a Ford King Ranch

Post Reply