slide on bunk brackets
Moderators: Redneck_Randy, badmoonrising, lakerunner
-
- Posts: 253
- Joined: Tue May 14, 2019 6:41 am
slide on bunk brackets
Hello everyone,
I'm trying to find new slide-on bunk brackets for my pontoon trailer. the ones I have are pretty corroded and I just don't want to take a chance of one breaking. so this is what they look like: I just can't find them at all...maybe someone can point me in the right direction. They slide over a 2" box tubing.
Thank you!!!!
I'm trying to find new slide-on bunk brackets for my pontoon trailer. the ones I have are pretty corroded and I just don't want to take a chance of one breaking. so this is what they look like: I just can't find them at all...maybe someone can point me in the right direction. They slide over a 2" box tubing.
Thank you!!!!
1995 Sun Tracker 21 Party Barge
60HP Mercury 2 stroke
It's new! to me
Loving the life here in Deland, Fla.
60HP Mercury 2 stroke
It's new! to me
Loving the life here in Deland, Fla.
Re: slide on bunk brackets
these guys may be able to help you. Lots of boat house builders down here use them. Boat House USA
https://bh-usa.com/
https://bh-usa.com/
2009 LOWE SS204 25in logs
90 Merc Optimax
Motorguide W55 Wireless
Underskinning
28 GPS
90 Merc Optimax
Motorguide W55 Wireless
Underskinning
28 GPS
-
- Posts: 253
- Joined: Tue May 14, 2019 6:41 am
Re: slide on bunk brackets
very cool...I'll check them out
1995 Sun Tracker 21 Party Barge
60HP Mercury 2 stroke
It's new! to me
Loving the life here in Deland, Fla.
60HP Mercury 2 stroke
It's new! to me
Loving the life here in Deland, Fla.
Re: slide on bunk brackets
Frankly I think what you have are in great shape. That's just a little surface corrosion. I have seen MUCH worse still holding boats up.
The springs, u-bolt holding the springs, and lag screws from the brackets to the bunks themselves have much worse oxidation.
The springs, u-bolt holding the springs, and lag screws from the brackets to the bunks themselves have much worse oxidation.
Re: slide on bunk brackets
I was thinking the same as Matt.
Big and ugly but we love our 1999/2000 Crest II DL with a Yamaha F115
Re: slide on bunk brackets
I have a couple that are needing to be replaced, but that's because the previous owner (obviously) didn't spray off the trailer when pulled out of saltwater. I think yours look fine, but I strongly suggest washing down after use.
Paul & Michele
2003 Landau DX 24' Cruise "Loretta Jane"
2003 Mercury 75hp
My Rebuild: http://pontoonforums.com/viewtopic.php?f=16&t=26135
"Don't waste brain cells over something you can do nothing about." --My Wife
2003 Landau DX 24' Cruise "Loretta Jane"
2003 Mercury 75hp
My Rebuild: http://pontoonforums.com/viewtopic.php?f=16&t=26135
"Don't waste brain cells over something you can do nothing about." --My Wife
-
- Posts: 253
- Joined: Tue May 14, 2019 6:41 am
Re: slide on bunk brackets
I took a picture of one of the good ones....there are some i don't know how they haven't disintegrated yet.
1995 Sun Tracker 21 Party Barge
60HP Mercury 2 stroke
It's new! to me
Loving the life here in Deland, Fla.
60HP Mercury 2 stroke
It's new! to me
Loving the life here in Deland, Fla.
Re: slide on bunk brackets
Maybe I am missing something in that picture as am curious how they slide on/off? Looks like the were slid on before they put the trailer together? Other than a grinder or blow torch, how are you going to get them off and get a new set back on? I must be missing something and hope you dont make me feel like and idiot (ha ha) with an explanation.
Here is something similar that is a true slide on.
https://www.easternmarine.com/magic-til ... ket-pt2025
Here is something similar that is a true slide on.
https://www.easternmarine.com/magic-til ... ket-pt2025
SOLD - 2009 20' Bentley w/4 Stroke 90hp Mercury
SOLD - 2011 SouthBay 522CR w/115 4 Stroke Mercury
2014 Xcursion 23RF XS package w/150 4 Stroke Mercury
SOLD - 2011 SouthBay 522CR w/115 4 Stroke Mercury
2014 Xcursion 23RF XS package w/150 4 Stroke Mercury
Re: slide on bunk brackets
Those are the ones I was thinking of too for replacements. I would imagine the existing ones were made by the trailer manufacturer. Might be able to check with whoever built the trailer if you know and if they still exist. Yacht Club has a parts list for example:BobL wrote: ↑Wed Jan 13, 2021 3:44 pmMaybe I am missing something in that picture as am curious how they slide on/off? Looks like the were slid on before they put the trailer together? Other than a grinder or blow torch, how are you going to get them off and get a new set back on? I must be missing something and hope you dont make me feel like and idiot (ha ha) with an explanation.
Here is something similar that is a true slide on.
https://www.easternmarine.com/magic-til ... ket-pt2025
http://hltlimitedtrailers.com/wp-conten ... 2020-B.pdf
2019 G3 SunCatcher V322 SS tritoon, Yamaha F200
2019 F-150 XLT SuperCrew FX4, 3.5L EcoBoost Max Trailer Tow Package
2019 F-150 XLT SuperCrew FX4, 3.5L EcoBoost Max Trailer Tow Package
-
- Posts: 253
- Joined: Tue May 14, 2019 6:41 am
Re: slide on bunk brackets
The picture doesn't show the whole story...the square tube that the brackets are on are open on the ends (at the sides of the trailer) so you can just slide off the bracket. There was a guy on Craigslist here locally that had those brackets and damn if I can't find them anymore. I might have to change brackets....we'll see.BobL wrote: ↑Wed Jan 13, 2021 3:44 pmMaybe I am missing something in that picture as am curious how they slide on/off? Looks like the were slid on before they put the trailer together? Other than a grinder or blow torch, how are you going to get them off and get a new set back on? I must be missing something and hope you dont make me feel like and idiot (ha ha) with an explanation.
Here is something similar that is a true slide on.
https://www.easternmarine.com/magic-til ... ket-pt2025
1995 Sun Tracker 21 Party Barge
60HP Mercury 2 stroke
It's new! to me
Loving the life here in Deland, Fla.
60HP Mercury 2 stroke
It's new! to me
Loving the life here in Deland, Fla.