honda outboard control feel

Message

ducati1212 · #1 Post by **ducati1212** » Mon Jun 22, 2015 4:17 am

My 20 avalon has a 90 honda outboard and I have a question about the control lever. Its a little loose in that if I put the boat to say 5000 RPM when I take my hand off the control it goes back down.

Is there just a way to tighten up the control lever so it has more resistance

Thanks

tuned · #2 Post by **tuned** » Mon Jun 22, 2015 4:21 am

Yep. They all have a 'friction screw' that needs to be tightened just a bit. You will have to look around for it or get a diagram. It's usually at the front or rear of the box. Good luck.

-dirt- · #3 Post by **-dirt-** » Mon Jun 29, 2015 9:42 am

I think this is what you are needing.

ducati1212 · #4 Post by **ducati1212** » Tue Jun 30, 2015 4:59 am

ahhh nice I have the top mount and was not finding much info I thought it had no adjuster. So its under the top cover I need to remove that and then adjust.

Pontoon Boat & Deck Boat Forum

honda outboard control feel

honda outboard control feel

Re: honda outboard control feel

Re: honda outboard control feel

Re: honda outboard control feel