Talon anchoring system

[wijames]

Has anyone installed a Minn Kota Talon anchor on their toon? How did you mount it? I've looked all over the Minn Kota sight and even contacted them for help but they don't seem to make a mount for pontoons. Any suggestions?

[Gonefishing]

There is a mount. It is a angle mount. Bolts to the floor at the rear. Check with them again. I have seen it on their websit when I was checking on getting one for my toon. But decided the price was not. Worth it. I purchased a shallow water anchor system. A lot cheaper and works great

[Capt Sully]

Haven't seen that one, heres what I installed. A TRAC 35 made for pontoon mounting. It's electric with a remote control. Iv'e used it only one season so far and it works great and sure beats pulling on a rode. Push a button and it goes up or down. I can stay seated and don't even have to put my beer down. Also it don't matter if you place it on the front or rear on a pontoon, works great.

Trac 35.jpg (111.19 KiB) Viewed 6036 times

[chill'nthemost]

Not only "beats pulling on a rope" but it would eliminate the hassle of spooling a rope after the ropes on deck. That's a nice setup.

[killerkernrich]

whats on the end of that rope?

[Gonefishing]

This is what is use and it works great. Can be purchased from Bass Pro Sho

http://shop.stickitanchorpins.com

[Capt Sully]

whats on the end of that rope?

Why an anchor of course. I'm using a 18lb river anchor here on the lake. It digs in just enough to hold but not too deep as a fortress would and easy for the motor to pull it up. Works great, I'm happy with it. They are making the gears on the motor out of metal now, before they were plastic and had some problems.

[hoosierhick]

Sully .Do you have any interference issues ?

[killerkernrich]

I have a maybe a 12 lb fortress and it just sometimes holds me in the lake wind that comes up alot.

[Capt Sully]

Sully .Do you have any interference issues ?

No issues at all. I deploy it using about a 5 to 1 scope. The line swings far out and the toon swings in the direction as the wind so the motor is always clear. Retrieving the line comes straight up from the tip of the bracket and clears everything. Like I said, I'm liking this. It also has a safety catch for trailering to support the anchor.

[wijames]

There is a mount. It is a angle mount. Bolts to the floor at the rear. Check with them again. I have seen it on their websit when I was checking on getting one for my toon. But decided the price was not. Worth it. I purchased a shallow water anchor system. A lot cheaper and works great

Which shallow water system did you get? I've tried several and every one has bent or broken. I guess I should have mentioned that I'm wanting something to use in the intercoastal. we regularly get 15-20 kt winds at the beach we go to.

[wijames]

Haven't seen that one, heres what I installed. A TRAC 35 made for pontoon mounting. It's electric with a remote control. Iv'e used it only one season so far and it works great and sure beats pulling on a rode. Push a button and it goes up or down. I can stay seated and don't even have to put my beer down. Also it don't matter if you place it on the front or rear on a pontoon, works great.

Trac 35.jpg

I just took one of thses off my boat and put it in the garbage! I bought the saltwater version and it still rusted like hell in just one season and the remote quit working after only a couple of months.

[wijames]

This is what is use and it works great. Can be purchased from Bass Pro Sho

http://shop.stickitanchorpins.com

I've tried these and they just dont do the trick in saltwater, even in 10-15 kt winds.

[Mrtoler]

[wijames]

Thanks for posting, That would work but was hoping not to have to mount it to my motor tummel or spenf an additional $250.00 for an additional mount. I'm going to the boat show this weekend and hope to see a few installs like this there. They may also have some show specials to bring down the price a little.