Tough to tell from the picture, but those tubes are about 3 feet in diameter.
Biga$$ Tritoon
Moderators: Redneck_Randy, badmoonrising, lakerunner
Biga$$ Tritoon
Saw this last summer and just getting around to post it. Someone is building themselves a giant tritoon. I'm guessing he's in the dock building business and is going to mount a pile driver or crane on the deck. I'm thinking he's going to need an extra-looooooong shaft motor.
Tough to tell from the picture, but those tubes are about 3 feet in diameter.
Tough to tell from the picture, but those tubes are about 3 feet in diameter.
Re: Biga$$ Tritoon
25" motor and a Jack plate will probley work, but he will probley need about 1000hp 
Ryan, Martha, Ana and Nathan Toler.
(SOLD)1992 24' monark sun spa 240 1996 (rebuilt) Johnson 112
2014 South Bay chassis (IN THE WORKS)
2006 dodge ram quad cab
Crosby Texas
(SOLD)1992 24' monark sun spa 240 1996 (rebuilt) Johnson 112
2014 South Bay chassis (IN THE WORKS)
2006 dodge ram quad cab
Crosby Texas
Re: Biga$$ Tritoon
I think he is going with a 50 horse Merc outboard, but after adding tap fins he is told he should run around 40 mph or so. 
Man, that is going to be one heavy workboat!
Man, that is going to be one heavy workboat!
2007 South Bay 925 Tri-toon
5.7 Volvo I/O
Tow Vehicle: Toyota Tundra, 1794 Edition
5.7 Volvo I/O
Tow Vehicle: Toyota Tundra, 1794 Edition
-
rancherlee
- Posts: 580
- Joined: Tue Jul 13, 2010 5:59 am
- Location: Eveleth MN
Re: Biga$$ Tritoon
I thought my Grandpas home made work barge was nuts but that takes the cake! Grandppa built his out of 6-500 gallon propane tanks, 3 for each tube. Worked great for placing and removing buoys as there was NO fear of hitting a rock with one of those.
1988' Kennedy 20' "Haley's Comet"
Rebuilt 2016 with 25" single strake outer tubes and a 25x23" straked U-tube
2003 Suzuki DF140 - Yamaha 9.9HT kicker - 39.1@6300rpm
Rebuilt 2016 with 25" single strake outer tubes and a 25x23" straked U-tube
2003 Suzuki DF140 - Yamaha 9.9HT kicker - 39.1@6300rpm