Box Anchors

You know the drill..

Moderators: Redneck_Randy, badmoonrising, lakerunner

Post Reply
Message
Author
guitarbob
Posts: 17
Joined: Fri Jun 01, 2012 6:32 am
Location: Corsicana, TX

Box Anchors

#1 Post by guitarbob » Mon Jun 18, 2012 1:44 pm

Anybody ever tried them?

Image
Image

User avatar
WoodenPontoon
Posts: 248
Joined: Sun Nov 02, 2008 11:08 am
Location: Preston CT

Re: Box Anchors

#2 Post by WoodenPontoon » Mon Jun 18, 2012 2:11 pm

Yes I have one and love it. It really holds the boat.

Dan
2009 --- 22 1/2' All Wood Basement-HandCrafted Tri-Hulled Pontoon "All Spruced Up"

Image

User avatar
ronb
Posts: 534
Joined: Thu May 17, 2012 1:14 pm
Location: ALOT of ND

Re: Box Anchors

#3 Post by ronb » Mon Jun 18, 2012 2:20 pm

I don't have one, but my friend does, he bought it for his old Bayliner and is using now with his Axis Wakeboard boat, he loves it. The only issue that he has with the one that he bought is that it is galvanized and the galvanization caused the pin that allows the box anchor to fold/collapse is very tight and sometimes he has to smack it around a little bit to get it to losen up. I see that the new ones are available in Stainless.

http://www.slideanchor.com/

I was checking out their anchor spear also..

Is that second picture something that you made or is that product available somewhere?

-ron

guitarbob
Posts: 17
Joined: Fri Jun 01, 2012 6:32 am
Location: Corsicana, TX

Re: Box Anchors

#4 Post by guitarbob » Mon Jun 18, 2012 3:08 pm

ronb wrote:
Is that second picture something that you made or is that product available somewhere?

-ron
The second pic is some box anchors a guy was selling on another forum, and had a couple of other guys chime in saying they used them and they worked great. I assume he makes them.

Look like they would be much better used on sandy bottoms?

guitarbob
Posts: 17
Joined: Fri Jun 01, 2012 6:32 am
Location: Corsicana, TX

Re: Box Anchors

#5 Post by guitarbob » Mon Jun 18, 2012 3:18 pm

Pretty good video explaining the box anchor. I sure like the way it folds flat too. Think I'm gonna try one.

http://youtu.be/Mv2ybwgcaL8

User avatar
serpa4
Posts: 95
Joined: Sun Feb 12, 2012 1:53 pm
Location: Columbia, SC

Re: Box Anchors

#6 Post by serpa4 » Mon Jun 18, 2012 4:31 pm

I'm on #2 on my second boat. Holds great. Make sure the rope is attached before you throw it overboard $$$$$.

User avatar
Mosnowman
Posts: 380
Joined: Fri May 04, 2012 3:31 pm
Location: MISSOURI....usually on Lake Pomme de Terre

Re: Box Anchors

#7 Post by Mosnowman » Mon Jun 18, 2012 7:47 pm

Absolutely love my box anchor! Pricey but am glad I did it....no chain required...drop it and your done! I have an anchor buddy attached to mine and it gives us a little movement while coving out....highly highly recommend!!!!
BUSY LIVING...
2012 Harris Flotebote 240 Cruiser Tritoon
Mercury Verado 150 / Performance Package @ Rough Water Package
Columbia Mo BZLIVN
It Comes Down To a Simple Choice..Get Busy Living or Get Busy Dying....

User avatar
MacToon
Posts: 79
Joined: Tue May 01, 2012 10:15 pm
Location: Lake Havasu, AZ

Re: Box Anchors

#8 Post by MacToon » Mon Jun 18, 2012 11:41 pm

A lot of the boats on our lake use them. I just bought mine based upon the recommendations from several friends - haven't had the opportunity to use it yet but everybody who's used them says they hold better than any other type of anchor.
ronb wrote:http://www.slideanchor.com/

I was checking out their anchor spear also..
I own one of their Shore Spikes and use it quite often. The "slide hammer" action makes it very easy to get in and out of the ground.
Mac
2012 Xcursion X-25RL X3
225 Yamaha VMax SHO

Fine Toon
Posts: 15
Joined: Wed Apr 11, 2012 3:56 am

Re: Box Anchors

#9 Post by Fine Toon » Tue Jun 19, 2012 5:03 am

WoodenPontoon wrote:Yes I have one and love it. It really holds the boat.

Dan
+1 on what he said.
2012 sylvan mirage cruise 8522 LZ w/ LE package
RPT tubes (tritoon)
Mercury four stroke 150

Post Reply