fuel pick up tube

You know the drill..

Moderators: Redneck_Randy, badmoonrising, lakerunner

Post Reply
Message
Author
dhawks
Posts: 2
Joined: Mon Jul 29, 2013 5:19 pm

fuel pick up tube

#1 Post by dhawks » Tue Aug 06, 2013 11:37 am

I have a 2005 sun tracker pontoon the pick up tube has deteriorated and has broken off, the replacement one, you have to cut, how far from the bottom of the tank is correct, Bradford Marine says a few inches, the tank isn't that deep. can someone advise?

User avatar
HandymanHerb
Site Admin
Posts: 14336
Joined: Fri Mar 17, 2006 8:57 pm
Location: Orlando Fla

Re: fuel pick up tube

#2 Post by HandymanHerb » Tue Aug 06, 2013 12:02 pm

Go within a 1/4 inch you want it to pick up all the fuel but still leave a little room for water to go
In Memory of John 6x6 Larsen

Image

User avatar
redbeard
Posts: 1203
Joined: Fri Jul 20, 2012 8:30 am
Location: Blue Springs, MO

Re: fuel pick up tube

#3 Post by redbeard » Tue Aug 06, 2013 12:25 pm

HandymanHerb wrote:Go within a 1/4 inch you want it to pick up all the fuel but still leave a little room for water to go
+1
Truman Lake
1986 24' Playcraft "The Georgia Peach"
1996 Evinrude 88 HP
14x11 Prop

User avatar
ToonGuy
Posts: 968
Joined: Tue Feb 08, 2011 9:34 am
Location: Lake Wawasee, Northern IN

Re: fuel pick up tube

#4 Post by ToonGuy » Tue Aug 06, 2013 1:28 pm

The end should also be cut at about a 45 degree angle...
Just one boat...after another, after another :-)

Bamaman
Posts: 3679
Joined: Fri May 06, 2011 1:44 pm
Location: NW Alabama--Tennessee River

Re: fuel pick up tube

#5 Post by Bamaman » Tue Aug 06, 2013 2:20 pm

I was going to say to cut it at a 45 degree angle. That's how the siphons on my Moeller 12 gallon portable tanks are.
'12 Bennington 24' SSLX Yamaha 150

User avatar
badmoonrising
Site Admin
Posts: 10066
Joined: Fri Mar 30, 2007 7:04 pm
Location: Chesapeake City, Maryland

Re: fuel pick up tube

#6 Post by badmoonrising » Tue Aug 06, 2013 2:32 pm

Yep, the factory pickup on my Party Cruiser was 1/4 inch from the bottom and cut flat. Replacement p/u was cut 45 degrees, so the plastic tank manufacturer must have had issues... :paranoid
Ed, Cheryl, Ethan and Aspen.
2013 Sun Tracker Party Barge 22 w/90 HP Mercury, "Hellrhighwater 2"
2014 E-350 Extended XLT.
Chesapeake City ,MD

dhawks
Posts: 2
Joined: Mon Jul 29, 2013 5:19 pm

Re: fuel pick up tube

#7 Post by dhawks » Thu Aug 08, 2013 10:01 am

Thanks, you guys have been great help!

Post Reply