Bottom Paint Barnegat Bay NJ

[Four R's]

Preparing for my 2nd year in the salt water. Dealer did the original bottom painting last year. This year I will be doing the painting. Once again, my boat will sit in the water from May thru September. Is there a preference between Pacifica Plus and Trilux 33? How many coats and what type of prep prior to painting (sanding)?
Thanks,
Four R's

[cwag911]

Can't help you on the paint choice, but while I was workg at a marina in Brielle NJ we used to power wash and then tape off the waterline, then paint. Never had a problem.

[badmoonrising]

If it was already painted it's always a good idea to use the same brand. Trilux is great, very durable. If the paint is in good shape, just a coat will do. Any spots where the paint and primer are showing through to metal, primer those spots. Never put bottom paint on aluminum without primer first.

[cleatus]

Powerwash thoroughly before painting, whatever your choice, Interlux recommends a light sanding (80 grit) and wipe down with 216 solvent, the sanding helps adhesion.
Our boat is wet slipped and I got two seasons out of the Pacifica Plus, and I'll be repainting for this upcoming summer, I put on 2 coats.
I used Trilux on outdrives in the past with good results, thought I'd try the Pacifica on the logs.

.

btw,
Interlux is currently offering a $10 rebate on the pacifica.

[badmoonrising]

Cleatus, I have plans to launch this weekend if you are out. May be fishing on the Bohemia.

[cleatus]

Ed, I won't be splashing for at least another month or so, hope ya catch something...the weekend forecast looks good!
enjoy your trip.