some questions about DeckMate seats......

You know the drill..

Moderators: Redneck_Randy, badmoonrising, lakerunner

Post Reply
Message
Author
cuda67bnl
Posts: 54
Joined: Fri Jun 13, 2014 10:33 am
Location: Loganville, GA.

some questions about DeckMate seats......

#1 Post by cuda67bnl » Sat Jun 14, 2014 2:48 pm

I'm in the market for new seats. I was gonna go with ones from Veada, but from what I can tell, there's hardly any room in the bases. Then I came across the premium deckmates from PS. After a lot of searching and seeing a ton of pics of these seats on other toons, I've decided to get them. Since quite a few of the forum members have them, I was hoping for some feedback on them.

1. Are they as nice as they look in all the pics I've seen?
2. Do they hold up well over time?
3. Is there enough room in the bases to house large batteries?
4. Do the sizes run true? I measured one spot on my boat and I come up with about a 1/2 inch clearance based on the sizes they give.
5. With my current wood framed seats, I cut a big hole where 2 of them join together so that I can store my fishing rods inside them. Since the deckmates have plastic bases, I'm thinking I may be able to fabricate some aluminum squares or rings to sandwich two seat bases together then cut the centers out so I can use them for rod storage like my old ones. Anyone have an opinion as to weather that'll work?

I'm sure I'll think of some more questions in a little bit.
Thanks.

Jimmy Tompkins
-Loganville, GA.

User avatar
rockhound
Posts: 234
Joined: Fri May 23, 2014 10:33 am

Re: some questions about DeckMate seats......

#2 Post by rockhound » Sat Jul 05, 2014 9:10 am

no feedback? too bad, also looking at these seats, $2600 to outfit my rig with new furniture without being able to see them first
An over forty victim of fate....


Obama: finally gone, MAGA

cuda67bnl
Posts: 54
Joined: Fri Jun 13, 2014 10:33 am
Location: Loganville, GA.

Re: some questions about DeckMate seats......

#3 Post by cuda67bnl » Sat Jul 05, 2014 11:04 am

Yeah, I was a little surprised to not get any feedback. But I bought them anyway. You can view my project here viewtopic.php?f=16&t=18956 . I'd suggest requesting vinyl samples before purchasing just to make sure you're okay with the colors. I chose the Ivory colored ones and they're not as white as they appear on the website or in other photos I found. But I'm very happy with them. I had one problem with a seat base and the owner saw my complaint about it and messaged me about it before I even got around to contact them. Their customer service is superb, and is a big reason I chose to go with them. I'll be ordering a few more things from them on Monday.

Jimmy

User avatar
curtiscapk
Posts: 5445
Joined: Mon Nov 10, 2008 8:31 am
Location: OP KS\Hillsdale Lake

Re: some questions about DeckMate seats......

#4 Post by curtiscapk » Tue Jul 08, 2014 1:08 pm

Wow guys sorry I missed these posts... normally I catch all these type of questions...

Cuda you done good by they way!

Rockhound fire away with questions of your own. :thumbsup
Craig and Paula
"THE FLOATER" rebuild Spring 2013
viewtopic.php?f=2&t=15328
94 Party Barge 24' 115 merc
Turning Point hustler 14 x 13 prop
22mph gps 3 people
12 F150
Overland Park Ks
Hillsdale Lake, KS

User avatar
redbeard
Posts: 1203
Joined: Fri Jul 20, 2012 8:30 am
Location: Blue Springs, MO

Re: some questions about DeckMate seats......

#5 Post by redbeard » Tue Jul 08, 2014 6:31 pm

Sorry about that guys I also just seen this post I always hit view new post when I log in sometimes I think it misses some of the post. Yes I have the seats, yes they are as nice as they look, Ive had mine for five years now and they still look new I use 303 cleaner on them and keep the boat covered always.
Truman Lake
1986 24' Playcraft "The Georgia Peach"
1996 Evinrude 88 HP
14x11 Prop

Post Reply