Raise motor

You know the drill..

Moderators: Redneck_Randy, badmoonrising, lakerunner

Post Reply
Message
Author
User avatar
killerkernrich
Posts: 1166
Joined: Sun Jul 03, 2011 7:54 am
Location: Bakersfield, CALIF

Raise motor

#1 Post by killerkernrich » Sat Feb 28, 2015 12:35 am

My boat shop mechanic told me the last time he changed a prop on a pontoon for owner that wanted to go down in pitch 2 numbers he lost 7-8mph. and suggested in my case he thought my motor was down a bit low so he raised it one bolt hole higher. I have not tested it yet, he thinks I will pick up some rpms and a little speed .......any thoughts?
Premier 221 Explorer 60hp merc

Proud Father of a Drill Sergeant at 193rd Basic Training Infantry Brigade, Ft Jackson, SC

PLP Member
Why don't anti-gun people have stickers on their windows that say This is a gun free home
NRA member
UFC fan

User avatar
mgarvie
Posts: 187
Joined: Sun Jul 29, 2012 12:58 pm
Location: Pekin, IL

Re: Raise motor

#2 Post by mgarvie » Sat Feb 28, 2015 6:59 am

When I moved my 60hp from my old boat to my pontoon, I lined up the cavitation plate up with the water line marks on my logs. From there I would go up or down one bolt hole at a time and test till I got the best speed and RPMs. Then I got a new prop to get my RPMs to what was listed in my owners manual for my outboard. I found a used engine hoist on Craigslist for $50 and can get the motor moved in about 15 minutes.

Bamaman
Posts: 3679
Joined: Fri May 06, 2011 1:44 pm
Location: NW Alabama--Tennessee River

Re: Raise motor

#3 Post by Bamaman » Sat Feb 28, 2015 8:27 am

Experimenting with engine heights and props may provide a little improvement, but low horsepower engines are not capable of much speed no matter what you do.
'12 Bennington 24' SSLX Yamaha 150

Post Reply