Filling gas tank problems

[creel]

Hello!

I'm attempting to fill my boat on the trailer using 5-gallon gas cans and one of those shaker siphons. I can get the siphon going no problem, but after a few seconds, gas will start coming out of the fill spout as I am filling it. I made sure that the siphon hose was inserted all the way. I tried again, and got the same result.

I looked inside the fill spout (on the side of my boat) and I can see some sort of metal tip with a hole in it sticking across the inside of the fill tube -- about 3 inches in. I think that the gas is hitting that as I am filling and it is running back out slowly. I can fill the tank with a funnel and pouring rreeaallyy slowly but that is a pain.

What is the best way to do this??

Thank you!

[sunedog]

Sorry, I don't have any answer for you. Just bumping back to the top. I use a Wonder Pump shaker hose every single weekend and have no problems with it.

[OK Toon]

No idea what that might be -- doesn't seem useful because using a jiggle hose or filling from a fuel pump, would cause gas to splash back out. I know my fill spout doesn't have anything like that since I just pulled the tank out last weekend to completely empty it and check the tube that pulls gas out to the fuel line to the motor. I was looking down in that fill spout with nothing blocking the view.

Hopefully somebody might have a suggestion for you.

[lakerunner]

Is your vent a part of fill tube? If so you might be closing it off causing fuel to back up

[creel]

Is your vent a part of fill tube? If so you might be closing it off causing fuel to back up

It is. My 'toon has an "Enviro-Fill" gas tank and the way the venting is designed is awful. I contacted Avalon about the issue and the company that makes the gas tank makes a manual fill aid aka a special funnel that they are sending me for free. The funnel supposedly sits in the fill tube just right to prevent the back spray I am getting. I hope this will fix the issue.

[lakerunner]

Excellent

[smltooner]

Is your vent a part of fill tube? If so you might be closing it off causing fuel to back up

It is. My 'toon has an "Enviro-Fill" gas tank and the way the venting is designed is awful. I contacted Avalon about the issue and the company that makes the gas tank makes a manual fill aid aka a special funnel that they are sending me for free. The funnel supposedly sits in the fill tube just right to prevent the back spray I am getting. I hope this will fix the issue.

I'm glad the company is sending you the funnel. Since they know there is a problem, it seems to me that they would provide the funnel with each new boat to prevent this problem.

[Seon]

.. aka a special funnel that they are sending me for free...

They're not doing you any favor...as mentioned, they should have provided that when you bought your Toon .

Glad all is good .