You know the drill..
Moderators: Redneck_Randy, badmoonrising, lakerunner
-
Mel85CJ
- Posts: 34
- Joined: Thu Apr 07, 2011 10:34 am
#1
Post
by Mel85CJ » Mon Aug 10, 2015 6:52 am
Anyone have any recommendations for an aftermarket one of these?
We have a 1995 20' Playbuoy.... just swapped over a used 75hp mariner with a new prop on it and it gets up and goes! (it previously has a 40hp force)
We have one of the ropes that triangulates out from the back of the toons to pull a tuber, but would rather have one of the bars that goes on the transoms.
Anyone have any recommendations?
Thanks!
Melanie
2001 Riviera Cruiser Regatta 2525
1985 Harris Flotebote Heritage 240
1994 Playbuoy Challenger 20 DLX
Deep Creek Lake, MD
-
TDJ2591
- Posts: 360
- Joined: Mon Jun 02, 2014 4:33 pm
- Location: Smith Lake, AL
#2
Post
by TDJ2591 » Mon Aug 10, 2015 4:11 pm
[color=#4000FF]2005 Crest Caribbean 25'
2006 Honda 135hp 4 stroke[/color]
-
curtiscapk
- Posts: 5445
- Joined: Mon Nov 10, 2008 8:31 am
- Location: OP KS\Hillsdale Lake
#3
Post
by curtiscapk » Tue Aug 11, 2015 5:56 am
You could find a welder and have one made.
-
Attachments
-
- IMG_1365a.JPG (156.31 KiB) Viewed 1228 times
Craig and Paula
"THE FLOATER" rebuild Spring 2013
viewtopic.php?f=2&t=15328
94 Party Barge 24' 115 merc
Turning Point hustler 14 x 13 prop
22mph gps 3 people
12 F150
Overland Park Ks
Hillsdale Lake, KS
-
PlaynDoc
- Posts: 1600
- Joined: Wed Mar 09, 2011 7:32 am
- Location: Milner, Georgia
#4
Post
by PlaynDoc » Tue Aug 11, 2015 8:53 am
yep... just have it made.... then have it powder coated....
make a mock-up with PVC...
make sure it fits....
have your welder make it... then, trial fit again...
then, off to the powder coating, then install....
2011 SunChaser DS22
Mercury 115 EFI
13.75 x 15p
