90 hp EFI Mercury 2009 Suntracker 22 pontoon
So the ignition switch vibrated loose, key came out and was dangling. Was running great till then. Now everything on the boat works except the motor and the trim. I have checked fuse box, all good. I have power to the motor, I do not get power to the ignition switch. There is a fuse box panel, all are fine. There is a box looking fuse by the battery that has a yellow tab on it. It was sticking out a little I pushed it back in. When I use a voltage tester I am getting power from one side of the box fuse by the battery to the other side so I don't think that is it.
Has anyone else had this happen and what was the problem?
When I first tried to put the ignition switch back in the hole and put the nut back on I did see a small spark. That makes me think fuse but I have been unable to locate.
Getting power everywhere except to the ignition switch, and the trim.
Ignition no power, gauges not lighting up trim doesnt work
Moderators: Redneck_Randy, badmoonrising, lakerunner
Re: Ignition no power, gauges not lighting up trim doesnt work
Power to the switch?
If so switch may be bad.
If so switch may be bad.
1995 beachcomber conversion to tritoon with Honda 135 ,
Link to rebuild [url=http://www.pontoonforums.com/viewtopic.php?f=16&t=19016][Knot Normal][/url]
God Bless America
Link to rebuild [url=http://www.pontoonforums.com/viewtopic.php?f=16&t=19016][Knot Normal][/url]
God Bless America
Re: Ignition no power, gauges not lighting up trim doesnt work
no power to the switch
Re: Ignition no power, gauges not lighting up trim doesnt work
Did you look at the fuses on the motor itself? For example only:
Respect Our Recreational Resources
Leaving Only "The Footprints of Your Passing"
Boating the Muskingum River
1972 35' Crest Pontoon Houseboat
2007 90 hp. Yamaha
Leaving Only "The Footprints of Your Passing"
Boating the Muskingum River
1972 35' Crest Pontoon Houseboat
2007 90 hp. Yamaha
Re: Ignition no power, gauges not lighting up trim doesnt work
I could not find a fuse on the motor last night. I looked. Thanks I will go look at that.
Re: Ignition no power, gauges not lighting up trim doesnt work
Boat is fixed, Thanks for the help. Just in case someone else has this problem, my fuses are not like in the video they are mounted to side of motor close to spark plugs. I have an extra fuse on board now...
- curtiscapk
- Posts: 5404
- Joined: Mon Nov 10, 2008 8:31 am
- Location: OP KS\Hillsdale Lake
Re: Ignition no power, gauges not lighting up trim doesnt work
Craig and Paula
"THE FLOATER" rebuild Spring 2013
viewtopic.php?f=2&t=15328
94 Party Barge 24' 115 merc
Turning Point hustler 14 x 13 prop
22mph gps 3 people
12 F150
Overland Park Ks
Hillsdale Lake, KS
"THE FLOATER" rebuild Spring 2013
viewtopic.php?f=2&t=15328
94 Party Barge 24' 115 merc
Turning Point hustler 14 x 13 prop
22mph gps 3 people
12 F150
Overland Park Ks
Hillsdale Lake, KS