Was planning on doing a simple rolling and tipping process. I have not seen a video of doing that on a pontoon boat.
I don't plan on using a auto or marine paint, maybe rustoleum. Can someone direct me to a good resource?
Thinking of painting my fence
Moderators: Redneck_Randy, badmoonrising, lakerunner
-
- Posts: 67
- Joined: Sun Apr 11, 2010 8:50 am
- Location: Olustee Florida and Pinson Alabama
Re: Thinking of painting my fence
I sanded ours with electric da sander as best as I could then rolled and brushed paint on. Then I cut graphics out and installed them looks great 10 ft away
I have pics in my build thread
I have pics in my build thread
Check out "Dudes" site www.whereisdude.com
Re: Thinking of painting my fence
Starts on page 4, finished on 5 I think
http://pontoonforums.com/viewtopic.php? ... 2&start=45
Blue painters tape, light sand (even over old graphics)
http://pontoonforums.com/viewtopic.php? ... 2&start=45
Blue painters tape, light sand (even over old graphics)
Check out "Dudes" site www.whereisdude.com
Re: Thinking of painting my fence
I did the same thing. I pressure washed the fences, used a rubber eraser wheel on my drill to remove any old vinyl/stickers and did a quick acetone wipe on all the fence. I used Majic tractor paint black matte. Not the greatest but looks pretty good from 5’ away. I just used a foam roller and a fine brush to get behind the fence rails.
- Attachments
-
- A260A6B3-E8EB-443E-9682-DAB67710A636.jpeg (376.59 KiB) Viewed 3540 times
-
- A03CB4C3-1DDB-4490-815F-B2BB6B14F11E.jpeg (661.2 KiB) Viewed 3540 times
-
- 15FD6262-B857-4CA1-B63C-3A63B8AA368D.jpeg (508.86 KiB) Viewed 3540 times
Re: Thinking of painting my fence
Same here, eraser wheel from fleabay $7 and change to remove the decals, then Kleen Strip spray on stripper to get the glue and old paint off-
https://www.homedepot.com/p/Klean-Strip ... /308061552
I'm completly restoring a 28' Party Hut, so at least a gallon of stripper and 4 eraser wheels to do all the fencing. it's a nasty tedious job, but it gets the fence to bare aluminium.
https://www.homedepot.com/p/Klean-Strip ... /308061552
I'm completly restoring a 28' Party Hut, so at least a gallon of stripper and 4 eraser wheels to do all the fencing. it's a nasty tedious job, but it gets the fence to bare aluminium.
1987 28' Sun Tracker Party Hut pontoon
-
- Posts: 67
- Joined: Sun Apr 11, 2010 8:50 am
- Location: Olustee Florida and Pinson Alabama
Re: Thinking of painting my fence
looks very good. got my outside painted. Looks very good. there are a few brush strokes but a few feet away it looks dang good. will update when I finish.