Unknown connection
Moderators: Redneck_Randy, badmoonrising, lakerunner
Unknown connection
I recently acquired a 2008 Manitou Osprey Pro (24 ft) and would like to know what purpose the rail connectors (photo attached) are used for. There are 2 on the side rails behind the bimini top, 2 mounted on the swing doors, 2 on the side rails, and 2 on the front rails. They are threaded but I have no attachments with the boat that fit. Maybe some type of cover support that was once used?? Hopefully someone can enlighten me. THanks!
- Attachments
-
- Rail.JPG (46.26 KiB) Viewed 63263 times
- curtiscapk
- Posts: 5441
- Joined: Mon Nov 10, 2008 8:31 am
- Location: OP KS\Hillsdale Lake
Re: Unknown connection
Hard to say. Mine had rod holders kinda similar that dropped inside but they connecters were bigger.
Craig and Paula
"THE FLOATER" rebuild Spring 2013
viewtopic.php?f=2&t=15328
94 Party Barge 24' 115 merc
Turning Point hustler 14 x 13 prop
22mph gps 3 people
12 F150
Overland Park Ks
Hillsdale Lake, KS
"THE FLOATER" rebuild Spring 2013
viewtopic.php?f=2&t=15328
94 Party Barge 24' 115 merc
Turning Point hustler 14 x 13 prop
22mph gps 3 people
12 F150
Overland Park Ks
Hillsdale Lake, KS
Re: Unknown connection
its for those screw in rod holders. I put about 5 of them on my toon.
I am the guy at the boat ramp that gives you dirty looks when you are a complete idiot and too stupid to know it.
Re: Unknown connection
I am the guy at the boat ramp that gives you dirty looks when you are a complete idiot and too stupid to know it.
Re: Unknown connection
Thanks! That makes sense. Still trying to figure and update this boat.