Questions about Add A Battery

[babock]

How is your ACR wired up in that second scenario? Wouldn't switching to battery #2 isolate battery #1 for the circuit? I'm guessing that your ACR isn't wired up on the output side of the switch?

With a 1/2/both switch, the ACR is wired across the 2 batteries.

[Friz]

I am guessing that a few of us are refugees from the PDB forum but at that site, BobG posted a fairly definitive procedure on 7/10/12 titled "Add-A-Battery". The post includes pictures of his work and wiring diagram.

Friz

'97 Landau DX 20 pushed by a
Yamaha C80 both which spend entirely too much time on a
Performance dual axle trailer all which follow behind a
'91 F350 Dually w an Int'l 7.3L chugger.

[Bamby]

I am guessing that a few of us are refugees from the PDB forum but at that site, BobG posted a fairly definitive procedure on 7/10/12 titled "Add-A-Battery". The post includes pictures of his work and wiring diagram

It was also posted here and you're absolutely right it is or should I say was a "Damn Fine Post" on the topic.

I added a Blue Sea Add-A-Battery to my boat. By: BobG

[Capt Sully]

Or if this is what you want to do ??

battery switch.jpg (92.58 KiB) Viewed 1265 times

[Mosnowman]

I had the Blue Seas Product installed and it works awesome! I added 2 AGM Sears high dollar batteries and now no worries....

If you are not mechanically inclined I would highly suggest you have someone install it. A lot of these guys on the boards are a lot more talented than they know! It took my dealer about 3-4 hours to get it done. I would have taken 3-4 years!!!